• ERDELYI N.H., HASHEMI S.M. On the Finite Element Free Vibration Analysis of Delaminated Layered Beams-A New Assembly Technique. Shock and Vibration (2015) (in press).

• RIZOV V. Analysis of mixed mode I/II/III fracture in foam core sandwich structures using imposed displacement split cantilever beams. Journal of Theoretical and Applied Mechanics, Sofia, 2015, vol. 45, No. 3, pp. 69–82.

• ERDELYI N.H., HASHEMI S.M. On the Finite Element Free Vibration Analysis of Delaminated Layered Beams-A New Assembly Technique. Shock and Vibration (2015) (in press).
• BURLAYENKO, V. N.; ALTENBACH, H.; SADOWSKI, T. An evaluation of displacement-based finite element models used for free vibration analysis of homogeneous and composite plates. Journal of Sound and Vibration, 2015, in press.
• SHARMA D.S., MUNGLA M.J., BARAD K.H. Vibration-based non-destructive technique to detect crack in multi-span beam. Nondestructive Testing and Evaluation 2015, in press.
• PRADHAN M., DASH P. R., PRADHAN P. K. Static and dynamic stability analysis of an asymmetric sandwich beam resting on a variable pasternak foundation subjected to thermal gradient. Meccanica 2015.
• MANOACH E, WARMINSKI J, WARMINSKA A. Large amplitude vibrations of heated Timoshenko beams with delamination. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406215570702, first published on February 5, 2015.
• PANDA H S, SAHU S K, PARHI P K. Hygrothermal response on parametric instability of delaminated bidirectional composite flat panels. European Journal of Mechanics-A/Solids 2015.
• MOTALLEBI A, IRANI S., SAZESH S. Analysis on jump and bifurcation phenomena in the forced vibration of nonlinear cantilever beam using HBM. Journal of the Brazilian Society of Mechanical Sciences and Engineering (2015), 1678-5878.
• ZATARAIN M, ALVAREZ J, BEDIAGA I, MUNOA J, DOMBÓVÁRI Z. Implicit subspace iteration as an efficient method to compute milling stability lobe diagrams. The International Journal of Advanced Manufacturing Technology, 21 Oct 2014.

• ERDELYI N.H., HASHEMI S.M. On the Finite Element Free Vibration Analysis of Delaminated Layered Beams-A New Assembly Technique. Shock and Vibration (2015) (in press).
• SHARMA D.S., MUNGLA M.J., BARAD K.H. Vibration-based non-destructive technique to detect crack in multi-span beam. Nondestructive Testing and Evaluation 2015, in press.
• GHIASIAN, S. E.; KIANI, Y.; ESLAMI, M. R. Nonlinear Thermal Dynamic Buckling of FGM Beams. European Journal of Mechanics-A/Solids, 2015.
• MANOACH E, WARMINSKI J, WARMINSKA A. Large amplitude vibrations of heated Timoshenko beams with delamination. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406215570702, first published on February 5, 2015.

• MAHAPATRA, T. R., PANDA, S. K., KAR, V. R. Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel. International Journal of Mechanics and Materials in Design, 1-19 (to appear).
• MAHAPATRA T. R., KAR V. R., PANDA S. K. Nonlinear free vibration analysis of laminated composite doubly curved shell panel in hygrothermal environment. Journal of Sandwich Structures and Materials 2015 (to appear).
• MAHAPATRA T. R., PANDA S. K., KAR V. R. Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel. International Journal of Mechanics and Materials in Design 2015 (to appear).

• MAHAPATRA, T. R., PANDA, S. K., KAR, V. R. Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel. International Journal of Mechanics and Materials in Design, 1-19 (to appear).
• HAJIKAZEMI M., SADR M.H., HOSSEINI-TOUDESHKA H., MOHAMMADI B. Thermo-elastic constants of cracked symmetric laminates: A refined variational approach. International Journal of Mechanical Sciences 2014 (to appear).

• OVESY H.R., TOTOUNFEROUSHA A., GHANNADPOUR S.A.M. Dynamic buckling analysis of delaminated composite plates using semi-analytical finite strip method. Journal of Sound and Vibration (2015) in press.
• ENDO M. Study on an alternative deformation concept for the Timoshenko beam and Mindlin plate models. International Journal of Engineering Science 87 (2015), 32–46.
• MLADENSKY A., RIZOV V. Non-linear fracture study of Single Cantilever Beam specimen. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 2014 (to appear).

• OVESY HR, NAGHINEJAD M, KHARAZI M. Delamination growth speed analysis in a compressed composite laminate based on first-order shear deformation theory. Journal of Composite Materials, 0021998315583074, first published on April 23, 2015
• LERPINIERE A., CARON J.F., DIAZ A.D., SAB K. The LS1 model for delamination propagation in multilayered materials at 0/theta interfaces: a comparison between experimental and finite elements strain energy release rates. International Journal of Solids and Structures (2014) in press.
• DE MORAIS, A.B. Cohesive zone beam modelling of mixed-mode I-II delamination. Composites Part A: Applied Science and Manufacturing (2014) in press.
• TOUBAL A, SAHLI A, KEBDANI S, RAHMANI O. Stress intensity solutions for cracked orthotropic plates. International Journal of Mechanics and Applications 3(5) (2013), 122-130.

• HAJIKAZEMI M., SADR M.H., HOSSEINI-TOUDESHKA H., MOHAMMADI B. Thermo-elastic constants of cracked symmetric laminates: A refined variational approach. International Journal of Mechanical Sciences 2014 (to appear)
• MLADENSKY A., RIZOV V. Non-linear fracture study of Single Cantilever Beam specimen. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 2014 (to appear).
  
  

• ZHOU W, LV Z.-H., WANG Y.-R, LIU R., CHEN W.-Y., LI X.-T. Acoustic response and micro-damage mechanism of fiber composite materials under mode-II delamination. Chinese Physics Letters 32(4) (2015), paper ID  046201, pp 1-4.
• LERPINIERE A., CARON J.F., DIAZ A.D., SAB K. The LS1 model for delamination propagation in multilayered materials at 0/theta interfaces: a comparison between experimental and finite elements strain energy release rates. International Journal of Solids and Structures (2014) in press.
• DE MORAIS, A.B. Cohesive zone beam modelling of mixed-mode I-II delamination. Composites Part A: Applied Science and Manufacturing (2014) in press.

• LI J, FANG Q, LIU Y. Elastic interaction between edge dislocation, concentrated force, point heat source and edge crack in a semi-infinite plane, Meccanica, 2013 (in press).

• MICHELIS S. Linear and nonlinear dynamics of a turbine blade in presence of an underplatform samper with friction. MSc Thesis, Graduate College of the University of Illinois at Chicago, USA, 2014.

• ACHACHE H., BOUTABOUT B., BENZERDJEB A., OUINAS D. Evaluation of energy release rate of composites laminated with finite element method. Structural Engineering and Mechanics 55 (1), pp. 191-204
• ACHACHE H., HOUISEG A., OUINAS D., BOUTABOUS A. Transfert de charge et frottement Fibre/Matrice d’un Matériau Composite (T300/914). 3eme Conférence Nationale de Mécanique et d’Industrie CNMI2014 - Univ-Mostaganem, Algérie. 9-10 Décembre, 2014.
• ZHOU W, LV Z.-H., WANG Y.-R, LIU R., CHEN W.-Y., LI X.-T. Acoustic response and micro-damage mechanism of fiber composite materials under mode-II delamination. Chinese Physics Letters 32(4) (2015), paper ID  046201, pp 1-4.
• KLOBEDANZ C. A study of the effect of delamination size on the critical sublaminate buckling load in a composite plate using the Ritz method. MSc Thesis (2014), Rensselaer Polytechnic Institute, Hartford, Connecticut.
• BEZNEA E.-F. CHIRICA I. Buckling behaviour of the delaminated sandwich plates under combined loads. Key Engineering Materials 601 (2014) pp. 88-91.
• GARDEAZABAL D., HE Z., KOTOUSOV A. On influence of non-singular stress states on brittle fracture. International Journal of Fracture,  185, (2014), 201-208
• KRUEGER R., SHIVAKUMAR K, RAJU I. Fracture mechanical analyses for interface crack problems - A review. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA Paper 2013-1476; NF1676L-15310, 8 - 11 April 2013, Boston, Massachusetts, USA.

• RIZOV V. Analysis of mixed mode I/II/III fracture in foam core sandwich structures using imposed displacement split cantilever beams. Journal of Theoretical and Applied Mechanics, Sofia, 2015, vol. 45, No. 3, pp. 69–82.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• MARAT-MENDES R., DE FREITAS M. Critérios de delaminaçao em modo-misto de materiais compósitos laminados de vidro/epóxido (Mixed-mode delamination of glass/epoxy laminated composite materials). Ciencia & Tecnologia dos Materiais  25(1) (January-June 2013), pp. 1-8.
• TAKEDA T., MIURA M., SHINDO Y., NARITA F. Fatigue delamination growth in woven glass/epoxy composite laminates under mixed-mode II/III loading conditions at cryogenic temperatures. Cryogenics  58 (2013) 55-61.

• MLADENSKY A. Investigation of cracks in composite materials. PhD thesis, University of Architecture, Civil Engineering and Geodesy, Sofia, 2013, p. 210 (in Bulgarian).

• RIZOV V. Non-linear analysis of double cantilever beam. Strength, Fracture and Complexity (2015) 9;149–160.
• RIZOV V. Analysis of mixed mode I/II/III fracture in foam core sandwich structures using imposed displacement split cantilever beams. Journal of Theoretical and Applied Mechanics, Sofia, 2015, vol. 45, No. 3, pp. 69–82.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• RIZOV V. , MLADENSKY A. Elastic-plastic analysis of Asymmetric double cantilever beam specimen. International Journal of Mechanical Sciences 2014 (to appear).
• MLADENSKY A. Investigation of cracks in composite materials. PhD thesis, University of Architecture, Civil Engineering and Geodesy, Sofia, 2013, p. 210 (in Bulgarian).

• HORNER A.L., DAVIDSON B.D. Fracture surface evolution and apparent delamination toughness in split composite beam specimens subjected to mixed mode I–III loading. Composites: Part A 79 (2015) 92–102.
• HORNER A.L., CZABAJ M.W., DAVIDSON B.D., RATCLIFFE J. G. Three-dimensional crack surface evolution in mode III delamination toughness tests. Engineering Fracture Mechanics 2015.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• JOHNSTON A.L., CZABAJ M.W., DAVIDSON B.D., RATCLIFFE J.G. Three-dimensional crack surface evolution in mode IIII delamination toughness tests. Proceedings of the American Society for Composites - 29th Technical Conference.
• JOHNSTON A.L., DAVIDSON B.D. Intrinsic coupling of near-tip matrix crack formation to mode III delamination advance in laminated polymeric matrix composites. International Journal of Solids and Structures 2014 (available online).
• JOHNSTON A.L., DAVIDSON B.D., SIMON K.K. Assessment of split-beam-type tests for mode III delamination toughness determination. International Journal of Fracture 185(1-2) (2014), 31-48.
• MARAT-MENDES R., DE FREITAS M. Fractographic analysis of delamination in glass/fibre epoxy composites. Journal of Composite Materials 47 (12) (2013), pp. 1437-1448
• JOHNSTON A.L., DAVIDSON B.D. Coupling of planar growth and matrix cracking in mode III delamination testing. 19th International Conference on Composite Materials (2013) July 28 - August 2. Canada Montréal.
• ZHOU W., LIANG X., LI Y., YOU S., LIU R., CHAI H., LV Z. Acoustic emission monitoring for delaminated composites under bending damage failure condition. Applied Mechanics and Materials 310, 2013, pp. 51-54.
• KIANI M., SHIOZAKI H., MOTOYAMA K., Ed.: PATTERSON E., BACKMAN D., CLOUD G. Composite Materials and Joining Technologies for Composites, Volume 7, Using Experimental Data to Improve Crash Modeling for Composite Materials. Conference Proceedings of the Society for Experimental Mechanics Series, pp.215-226, 2013, Springer New York.
• JOHNSTON A.L., DAVIDSON B.D., SIMON K.K. Evaluation of new test methods for the determination of GIIIc of laminated polymeric composites. 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting , pp. 120-139.
• VITO Z. A study of measuring the mode III fracture toughness of a gypsum disk with an edged crack. MSc Thesis, 2012, National Cheng Kung University, Taiwan. Source: Electronic Theses and Dissertation Service, Link.

• BOYANO A., MOLLÓN V., BONHOMME J., DE GRACIA J., ARRESE A., MUJIKA F. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II. Engineering Fracture Mechanics 2015.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• ISLAM M.M., KAPANIA R.K. Global–local finite element analysis of adhesive joints and crack propagation.  Journal of Aircraft (2014). doi: 10.2514/1.C032387.
• ISLAM M.M. Evaluation of adhesive joints for combined load test-fixtures. Journal of Mechanics Engineering and Automation 3 (2013) 529-542, David publishing.
• ISLAM M.M., KAPANIA R.K. A study of the adhesive joints and crack propagation using a global-local finite element method. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 8 - 11 April 2013, Boston, Massachusetts, USA.
• RIZOV V.I., MLADENSKY A.S. Strain energy release rate determination in the case of mode II crack in overhanging bilayer composite beam. Journal of Theoretical and Applied Mechanics, Sofia, 2013, vol. 43, No. 3, pp. 87–96.
• YOSHIHARA H. Initiation and propagation fracture toughness of solid wood under the mixed mode I/II condition examined by mixed-mode bending test. Engineering Fracture Mechanics 104;(2013), pp 1-15.
• ISLAM M.M., KAPANIA R.K. Evaluation of adhesive joints of two different materials. ASME 2012 International Mechanical Engineering Congress and Exposition, Volume 1: Advances in Aerospace Technology, Houston, Texas, USA, November 9–15, 2012, ISBN: 978-0-7918-4517-2.

• CAVAILERO P.M.L.. Fracture characterization  of  a  hybrid  cork/carbon-epoxy  laminate under mixed-mode I+II loading conditions. MSc thesis, University of Porto, 2015.
• DE GRACIA J., BOYANO A., ARRESE A., MUJIKA F. A new approach for determining the R-curve in dcb tests without optical measurements. Engineering Fracture Mechanics (2015) in press.
• RIZOV V.I., MLADENSKY A.S. Strain energy release rate determination in the case of mode II crack in overhanging bilayer composite beam. Journal of Theoretical and Applied Mechanics, Sofia, 2013, vol. 43, No. 3, pp. 87–96.
• FERNÁNDEZ M.V. Fracture characterization of composite bonded joints under fatigue loading. PhD Thesis, 2013, University of Porto, Faculty of Engineering, Portugal.
• FERNÁNDEZ M.V. , DE MOURA M. F. S. F., DA SILVA L. F. M., MARQUES A.T. Mixed-mode fatigue/fracture characterization of composite bonded joints using the Single-Leg Bending test. Composites Part A - Applied Science and Manufacturing 44 (1), 2013, pp. 63-69.

• HORNER A.L., DAVIDSON B.D. Fracture surface evolution and apparent delamination toughness in split composite beam specimens subjected to mixed mode I–III loading. Composites: Part A 79 (2015) 92–102.
• MERIEM-BENZIANE, M., ZAHLOUL, H. Experimental study of pipelines steel. Journal of Applied Mechanics and Technical Physics, 2015, 56.3: 502-509.
• HORNER A.L., CZABAJ M.W., DAVIDSON B.D., RATCLIFFE J. G. Three-dimensional crack surface evolution in mode III delamination toughness tests. Engineering Fracture Mechanics 2015.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• CRICRI G., PERELLA M, SESSA S, VALOROSO N. A novel fixture for measuring mode III toughness of bonded assemblies, Engineering Fracture Mechanics, Available online 14 March 2015.
• LÓPEZ-MENÉNDEZ A., VINA J., ARGÜELLES A., MOLLÓN V., LOZANO M. A new methology for testing composite materials in mode III of fracture. 16th European Conference on Composite Materials, ECCM 2014.
• RIZOV V. , MLADENSKY A. Elastic-plastic analysis of Asymmetric double cantilever beam specimen. International Journal of Mechanical Sciences 2014 (to appear).
• JOHNSTON A.L., CZABAJ M.W., DAVIDSON B.D., RATCLIFFE J.G. Three-dimensional crack surface evolution in mode IIII delamination toughness tests. Proceedings of the American Society for Composites - 29th Technical Conference.
• KHOSHRAVAN M.R., MOSLEMI M. Investigation on mode III interlaminar fracture of glass/epoxy laminates using a modified split cantilever beam test. Engineering Fracture Mechanics 2014 (available online)
• MEHRABADI F.A. The use of ECT and 6PBP tests to evaluate fracture behavior of adhesively bonded steel/epoxy joints under Mode-III and Mixed Mode III/II. Applied Adhesion Science 2:18 (2014) doi:10.1186/2196-4351-2-18.
• JOHNSTON A.L., DAVIDSON B.D. Intrinsic coupling of near-tip matrix crack formation to mode III delamination advance in laminated polymeric matrix composites. International Journal of Solids and Structures 2014 (available online).
• RODRÍGUEZ-GONZÁLEZ J.A., MAY-PAT, A., AVILÉS F. A beam specimen to measure the face/core fracture toughness of sandwich materials under a tearing loading mode. International Journal of Mechanical Sciences 79 (2014), pp. 84-94.
• JOHNSTON A.L., DAVIDSON B.D. Coupling of planar growth and matrix cracking in mode III delamination testing. 19th International Conference on Composite Materials (2013) July 28 - August 2. Canada, Montréal.
• JOHNSTON A.L., DAVIDSON B.D., SIMON K.K. Assessment of split-beam-type tests for mode III delamination toughness determination. International Journal of Fracture 2013 (available online).
• MLADENSKY A. Investigation of cracks in composite materials. PhD thesis, University of Architecture, Civil Engineering and Geodesy, Sofia, 2013, p. 210 (in Bulgarian).
• RIZOV V.I., MLADENSKY A.S. Strain energy release rate determination in the case of mode II crack in overhanging bilayer composite beam. Journal of Theoretical and Applied Mechanics, Sofia, 2013, vol. 43, No. 3, pp. 87–96.
• MEHRABADI F.A., KHOSRAVAN M. Mode III interlaminar fracture in woven glass/epoxy composite laminates.  International Scholarly and Scientific Research & Innovation 7(1), 2013, pp. 427-430
• MEHRABADI F.A., KHOSRAVAN M. Mode III interlaminar fracture in woven glass/epoxy composite laminates.  World Academy of Science, Engineering and Technology 73 2013, pp. 479-482
• MEHRABADI F.A. Analysis of pure mode III and mixed mode (III+ II) interlaminar crack growth in polymeric woven fabrics. Materials & Design  44, 2013, PP. 429-437.
• MEHRABADI F.A., KHOSRAVAN M. Mode III interlaminar fracture and damage characterization in woven fabric-reinforced glass/epoxy composite laminates. Journal of Composite Materials (2013) (article in press).
• JOHNSTON A.L., DAVIDSON B.D., SIMON K.K. Evaluation of new test methods for the determination of GIIIc of laminated polymeric composites. 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting , pp. 120-139.
• DE MORAIS, A.B., PEREIRA, A.B., DE MOURA, M.F.S.F. Mode III interlaminar fracture of carbon/epoxy laminates using the Six-Point Edge Crack Torsion (6ECT). Composites Part A: Applied Science and Manufacturing 42 (11), 2011 pp. 1793-1799.
• DAVIDSON, B.A., SEDILES, F.O. Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test. Composites Part A: Applied Science and Manufacturing (2011) 42 (6), pp. 589-603.
• DAVIDSON, B.D., SEDILES, F.O., HUMPHREYS, K.D. A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination. 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 2, pp. 1001-1020, 20-22 September 2010, Dayton, Ohio, USA.

• RIZOV V. Analysis of mixed mode I/II/III fracture in foam core sandwich structures using imposed displacement split cantilever beams. Journal of Theoretical and Applied Mechanics, Sofia, 2015, vol. 45, No. 3, pp. 69–82.
• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• RIZOV V. Mixed-mode I/III fracture study of sandwich beams. Cogent Engineering 2(1) 2015, pp. 1-11.
• IRVING P.E., SOUTIS C. Polymer Composites in the Aerospace Industry. UK, Elsevier 2014.
• TAKEDA T., MIURA M., SHINDO Y., NARITA F. Fatigue delamination growth in woven glass/epoxy composite laminates under mixed-mode II/III loading conditions at cryogenic temperatures. Cryogenics 2013 (article in press).
• MIURA M., SHINDO Y., TAKEDA T., NARITA F. Mixed-mode I/III fatigue delamination growth in woven glass/epoxy composite laminates at cryogenic temperatures. Journal of Composite Materials 2013 (article in press).
• DE MORAIS, A.B., PEREIRA, A.B., DE MOURA, M.F.S.F. Mode III interlaminar fracture of carbon/epoxy laminates using the Six-Point Edge Crack Torsion (6ECT). Composites Part A: Applied Science and Manufacturing 42 (11), 2011 pp. 1793-1799.
• RAVICHANDARAN R. Mixed mode fracture characterization and analysis of aluminum alloys using bend specimens. PhD Thesis, Anna University, India,, 30/10/2011.
• DAVIDSON, B.D., SEDILES, F.O. Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test. Composites Part A: Applied Science and Manufacturing (2011) 42 (6), pp. 589-603.
• DE MOURA, M.F.S.F., GUEDES R.M., LUIGI N. Wiley Encyclopedia of Composites - Interlaminar Fracture. John Wiley & Sons, Inc., 2011. DOI:10.1002/9781118097298.weoc095
• DAVIDSON, B.D., SEDILES, F.O., HUMPHREYS, K.D. A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination. 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 2, pp. 1001-1020, 20-22 September 2010, Dayton, Ohio, USA.

• RIZOV V. Analysis of mixed-mode II/III fracture in sandwich beams. Multidiscipline Modeling in Materials and Structures 11(1) 2015.
• RIZOV V. Mixed-Mode II/III Fracture in Foam Core Sandwich Beams. Cellular Polymers 33(6), 2014. 287-300.
• SUEMASU, H., TANIKADO, Y. Damage growth behavior and interlaminar fracture resistance of CFRP laminates under shear fracture mode. Advanced Composite Materials (2014) in press.
• ISLAM M.M., KAPANIA R.K. Global–local finite element analysis of adhesive joints and crack propagation.  Journal of Aircraft (2014). doi: 10.2514/1.C032387.
• BUDZIK M., JENSEN H.M. Bonded bimaterial ring under compressive load. Proceedings of the Institution of Mechanical Engineers (2013) (in press).
• ISLAM M.M. Evaluation of adhesive joints for combined load test-fixtures. Journal of Mechanics Engineering and Automation 3 (2013) 529-542, David publishing.
• HO L., JOSHI S.P., TAY A.A.O. Experiments and three-dimensional modeling of delamination in an encapsulated microelectronic package under thermal loading. IEEE Transactions on Components, Packaging and Manufacturing Technology, 3(11), (2013); pp.1859-1867
• ISLAM M.M., KAPANIA R.K. A study of the adhesive joints and crack propagation using a global-local finite element method. 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 8 - 11 April 2013, Boston, Massachusetts, USA.
• MEHRABADI F.A. Analysis of pure mode III and mixed mode (III+II) interlaminar crack growth in polymeric woven fabrics. Materials & Design 44, 2013, PP. 429-437.
• ISLAM M.M., KAPANIA R.K. Evaluation of adhesive joints of two different materials. ASME 2012 International Mechanical Engineering Congress and Exposition, Volume 1: Advances in Aerospace Technology, Houston, Texas, USA, November 9–15, 2012, ISBN: 978-0-7918-4517-2.
• SUEMASU, H., TANIKADO, Y. Delamination propagation behavior and the fracture toughness of composite laminates under shear fracture mode. 27th Annual Technical Conference of the American Society for Composites 2012, Held Jointly with 15th Joint US-Japan Conference on Composite Materials and ASTM-D30 Meeting , pp. 367-379.
• MIURA M., SHINDO Y., TAKEDA T., NARITA F. Interlaminar fracture characterization of woven glass/epoxy composites under mixed-mode II/III loading conditions at cryogenic temperatures. Engineering Fracture Mechanics (2012) 96 pp.615-625.
• ISLAM MM. Global-local Finite Element Fracture Analysis of Curvilinearly Stiffened Panels and Adhesive Joints. 2012. PhD Thesis. Virginia Polytechnic Institute and State University.
• DE MORAIS, A. B., PEREIRA, A. B. Interlaminar fracture under mixed-mode II + III and I + III. Link
• HO S.L. Delamination in microelectronic packages: with consideration of three-dimensional and rate effects. 2011. PhD Thesis. National University of Singapore.
• JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R. Beam on elastic foundation with anticlastic curvature: Application to analysis of mode I fracture tests. Engineering Fracture Mechanics (2011) 78;18, pp. 3253-3269.
• DE MORAIS, A.B., PEREIRA, A.B., DE MOURA, M.F.S.F. Mode III interlaminar fracture of carbon/epoxy laminates using the Six-Point Edge Crack Torsion (6ECT). Composites Part A: Applied Science and Manufacturing 42 (11), 2011 pp. 1793-1799.
• ABRATE S. (Ed.) Impact Engineering of Composite Structures. CISM Courses and Lectures Vol. 256. Springer, Wien, New York, 2011.
• DE MOURA, M.F.S.F., GUEDES R.M., LUIGI N. Wiley Encyclopedia of Composites - Interlaminar Fracture. John Wiley & Sons, Inc., 2011. DOI:10.1002/9781118097298.weoc095
• M. M. ISLAM AND RAKESH K. KAPANIA. Delamination Growth Using Cohesive Zone Model for Adhesive Bonding Under Compression. Experimental and Applied Mechanics, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series, 2011, Volume 9999, 527-536, DOI: 10.1007/978-1-4614-0222-0_63
• KONDO, A., SATO, Y., SUEMASU, H., AOKI, Y. Fracture resistance of carbon/epoxy composite laminates under mixed-mode II and III failure and its dependence on fracture morphology. Advanced Composite Materials 2011, 20 (5), pp. 405-418
• HO, S.L., TAY, A.A.O. A numerical analysis of penny-shaped delaminations in an encapsulated silicon module. Proceedings - Electronic Components and Technology Conference. art. no. 5898649, May 31 2011-June 3 2011, pp. 1115-1121
• DAVIDSON, B.D., SEDILES, F.O. Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test. Composites Part A: Applied Science and Manufacturing (2011) 42 (6), pp. 589-603.
• PEREIRA, A.B., DE MORAIS, A.B., DE MOURA, M.F.S.F. Design and analysis of a new six-point edge crack torsion (6ECT) specimen for mode III interlaminar fracture characterisation. Composites Part A: Applied Science and Manufacturing (2011) 42 (2), pp. 131-139.
• DAVIDSON, B.D., SEDILES, F.O., HUMPHREYS, K.D. A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination. 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 2, pp. 1001-1020, 20-22 September 2010, Dayton, Ohio, USA.
• OBDRZALEK V. Buckling and postbuckling of delaminated composite plates. Brno University of Technology, Faculty of Mechanical Engineering, Institute of Solid Mechanics, Mechantronics and Biomechanics, PhD Thesis, 2010, Czech Republic.
• SUEMASU, H., KONDO, A., GOZU, K., AOKI, Y. Novel test method for mixed mode II and III interlaminar fracture toughness. Advanced Composite Materials (2010) 19 (4), pp. 349-361.
• MARAT-MENDES, R.M., FREITAS, M.M. Failure criteria for mixed mode delamination in glass fibre epoxy composites. Composite Structures (2010) 92 (9), pp. 2292-2298.
• KENANE, M., BENMEDAKHENE, S., AZARI, Z. Fracture and fatigue study of unidirectional glass/epoxy laminate under different mode of loading. Fatigue and Fracture of Engineering Materials and Structures (2010) 33 (5), pp. 284-293.
• MALFI R., BELHOUARI M., BACHIR BOUIADJRA B., ACHOUR T. Modelisation numerique du comportement en rupture d'un composite multicouche. 9eme Congres de Mécanique, 21-24 Avril 2009, Marrakech, Maroc. pp. 271-273, Paper ID: 0301.
• NIKBAKHT, M., CHOUPANI, N., HOSSEINI, S.R.2D and 3D interlaminar fracture assessment under mixed-mode loading conditions. Materials Science and Engineering A (2009) 516 (1-2), pp. 162-168
• PEREIRA, A.B., DE MORAIS, A.B. Mixed-mode I + III interlaminar fracture of carbon/epoxy laminates. Composites Part A: Applied Science and Manufacturing (2009) 40 (4), pp. 518-523.
• DE MORAIS, A.B., PEREIRA, A.B. Mixed mode II + III interlaminar fracture of carbon/epoxy laminates. Composites Science and Technology (2008) 68 (9), pp. 2022-2027.
• NIKBAKHT M., CHOUPANI N. Fracture toughness characterization of carbon-epoxy composite using arcan specimen. World Academy of Science, Engineering and Technology 41 2008, 738-744.
• NIKBAKHT M., CHOUPANI N. Fracture toughness characterization of carbon-epoxy composite using Arcan specimen. International Journal of Mechanical, Industrial and Aerospace Engineering 2:4 2008, 247-253.
• VIT OBDRZALEK, JAN VRBKA. Buckling and Postbuckling of a Large Delaminated Plate Subjected to Shear Loading. Engineering Mechanics, Vol. 16, 2009, No. 4, p. 297-312.
• NIKBAKHT M., CHOUPANI N. Numerical Investigation of Delamination in Carbon-Epoxy Composite using Arcan Specimen. International Journal of Mechanical, Industrial and Aerospace Engineering 2:4 2008, 259-266.
• NIKBAKHT M., CHOUPANI N. Characterization and Determination of Critical Interlaminar Fracture Toughness of Carbon-Epoxy with Arcan Specimen. Majlesi Journal of Mechanical Engineering. 2009, Vol. 2 No 3. 17-25.
• PERTTU HINTIKKA. Determination of interlaminar fracture toughness of composite laminates. PhD Thesis. Helsinki University of Technology, 18 May 2009.
• H. SUEMASU, A. KONDO, K. GOZU AND Y. AOKI. Double notched split cantilever test method to measure the mixed mode II and III interlaminar toughness. ICCM-17 17th International Conference on Composite Materials. Paper ID. F9.6. 27 Jul 2009 - 31 Jul 2009, Edinburgh International Convention Centre (EICC), Edinburgh, UK.
• ATSUSHI KONDO, YUTA SATO, HIROSHI SUEMASU, KATSUHISA GOUZU AND YUICHIRO AOKI. Characterization of Fracture Resistance of Carbon/Epoxy Composite Laminates during Mixed-Mode II and III Stable Damage Propagation. Journal of the Japan Society for Composite Materials. Vol. 36 (2010) , No. 5 pp.179-188.

• GHIASIAN, S. E.; KIANI, Y.; ESLAMI, M. R. Nonlinear Thermal Dynamic Buckling of FGM Beams. European Journal of Mechanics-A/Solids, 2015.
• MANOACH E, WARMINSKI J, WARMINSKA A. Large amplitude vibrations of heated Timoshenko beams with delamination. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406215570702, first published on February 5, 2015.
• SALEM N.B., JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R., LAVELLE F. Analytical and experimental investigations of crack propagation in adhesively bonded joints with the mixed mode bending (MMB) test Part II: Investigation of cohesive stresses distribution with backface strain monitoring. Theoretical and Appleid Fracture Mechanics (in press) 2014.
• RIZOV V.I., MLADENSKY A.S. Strain energy release rate determination in the case of mode II crack in overhanging bilayer composite beam. Journal of Theoretical and Applied Mechanics, Sofia, 2013, vol. 43, No. 3, pp. 87–96.
• MLADENSKY A., RIZOV V. Analytical investigation of nonlinear interlaminar fracture in trilayered polymer composite beam under mode II crack loading conditions using the J -integral approach. Archive of Applied Mechanics 2013 (to appear).
• SALEM B.N. Reliability of bonded assemblies for space launchers. PhD Thesis. L'Université de Bordeaux, École Doctorale des Sciences Physiques et de l'Ingénieur, 2013.
• BUDZIK M., K.JUMEL J. et al., SALEM B.N., Shanahan M.E.R. Comparison of cyclic and monotonic loading of a double cantilever beam adhesion test. Journal of Adhesion 90(3) (2013) 252-267.
• SALEM B.N., BUDZIK M. K., JUMEL J. et al. Investigation of the crack front process zone in the Double Cantilever Beam test with backface strain monitoring technique. Engineering Fracture Mechanics 98, 2013, pp.272-283
• BENNATI, S., FISICARO, P., VALVO, P.S. An enhanced beam-theory model of the mixed-mode bending (MMB) test - Part I: Literature review and mechanical model. Meccanica 48 (2), 2013, pp. 443-462.
• ALLAER, K., DE BAERE, I., VAN PAEPEGEM W., DEGRIECK, J. Infrared welding of carbon fabric reinforced thermoplastics. JEC Composites Magazine 2012;49 (77) , pp. 44-47
• DE BAERE, I., ALLAER, K., VAN PAEPEGEM W., DEGRIECK, J. Fatigue behaviour of infrared welded joints in fibre reinforced thermoplastics. DURACOSYS 2012 - 10th International Conference on Durability of Composite Systems. September 17-19, 2012, Brussels, Belgium.
• Numerical simulation of delamination in composite laminates. PhD thesis, 2012, Link.
• ALLAER, K., DE BAERE, I.-, JACQUES, S., VAN PAEPEGEM W., DEGRIECK, J. Assessment of The Infrared Welding Process for a carbon fabric reinforced PPS. ECCM15 - 15th European Conference on Composite Materials, 24-28 June, 2012, Venice, Italy, pp.1-8.
• DE BAERE, I., ALLAER, K., JACQUES, S., VAN PAEPEGEM W., DEGRIECK, J. Interlaminar behavior of infrared welded joints of carbon fabric-reinforced polyphenylene sulfide. Polymer Composites (2012) 33 (7), pp. 1105-1113.
• CHEN F. Interface mechanics of layered composite beam-type structures. PhD Thesis. Washington State University, Department of Civil and Environmental Engineering, august 2011.
• JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R. Beam on elastic foundation with anticlastic curvature: Application to analysis of mode I fracture tests. Engineering Fracture Mechanics (2011) 78;18, pp. 3253-3269.
• JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R. Process zone in the Single Cantilever Beam under transverse loading. Part I: Theoretical analysis. Theoretical and Applied Fracture Mechanics (2011) 56;1, pp. 7-12.
• QIAO, P., CHEN, F. On the compliance and energy release rate of generically-unified beam-type fracture specimens. Journal of Composite Materials (2011) 45 (1), pp. 65-101.
• ARRESE, A., CARBAJAL, N., VARGAS, G., MUJIKA, F. A new method for determining mode II R-curve by the End-Notched Flexure test  Engineering Fracture Mechanics (2010) 77(1), pp. 51-70.
• LUO, Q., TONG, L. Fracture prediction of adhesively bonded structures using energy release rates. Journal of Adhesion Science and Technology (2009) 23 (10-11), pp. 1415-1440.
• BENNATI, S., COLLELUORI, M., CORIGLIANO, D., VALVO, P.S. An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates. Composites Science and Technology (2009) 69 (11-12), pp. 1735-1745.
• YOSHIHARA, H., SATOH, A. Shear and crack tip deformation correction for the double cantilever beam and three-point end-notched flexure specimens for mode I and mode II fracture toughness measurement of wood. Engineering Fracture Mechanics (2009) 76 (3), pp. 335-346.
• I DE BAERE, W VAN PAEPEGEM, J. DEGRIECK. Feasibility Study of Fusion Bonding for Carbon Fabric Reinforced Polyphenylene Sulphide by Hot-Tool Welding. Journal of Thermoplastic Composite Materials, July 19, 2011.
• PAOLO S. VALVO. Does shear deformability influence the mode II delamination of laminated beams? 17th European Conference on Fracture. 2-5 September, 2008, 2-5 September, Brno, Czech Repulic. pp.1470-1477.

• LIU P.F., GU Z.P. Finite element analysis of single-Leg bending delamination of composite laminates using a nonlinear cohesive model. Journal of Failure Analysis and Prevention 2015, pp 1-7 (in press)
• BOYANO A., MOLLÓN V., BONHOMME J., DE GRACIA J., ARRESE A., MUJIKA F. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II. Engineering Fracture Mechanics 2015.
• CHARALABOUS G., ALLEGRI G., LANDER J. K., HALLETT S. A cut-ply specimen for the mixed-mode fracture toughness and fatigue characterisation of FRPs. Composites Part A: Applied Science and Manufacturing, Available online 18 March 2015
• LIU P. F., YANG J., WANG B., ZHOU Z. F., ZHENG J. Y. A Study on the Intralaminar Damage and Interlaminar Delamination of Carbon Fiber Composite Laminates Under Three-Point Bending Using Acoustic Emission. Journal of Failure Analysis and Prevention 2014 (in press).
• RIZOV V.I., MLADENSKY A.S. Strain energy release rate determination in the case of mode II crack in overhanging bilayer composite beam. Journal of Theoretical and Applied Mechanics, Sofia, 2013, vol. 43, No. 3, pp. 87–96.
• CARDOSO R.F.G . Desenvolvimento de um dispositivo para a determinaçao da tenacidade de adesivos em modo misto. PhD Theis, Faculdade de Engenharia da Universidade do Porto, 2012.
• ARGÜELLES, A., VINA, J., CANTELI, A.F., BONHOMME, J. Influence of resin type on the delamination behavior of carbon fiber reinforced composites under mode-II loading. International Journal of Damage Mechanics (2011) 20;7, pp. 963-978.
• DA SILVA, LFM,  ESTEVES, VHC,   CHAVES, FJP. Fracture toughness of a structural adhesive under mixed mode loadings. Materialwissenschaft und Werkstofftechnik 2011;42(5), pp. 460-470.
• SAKHAEE-POUR, A, GOWHARI-ANARAKI, AR, HARDY, SJ. The Effect of Stiffness on Stress Intensity Factor for a Crack in Annular Disc Under Constant Central Torque. International Journal of Damage Mechanics 2010;19(8). pp. 1001-1015
• ESTEVEZ V. H. C.. Determinação da Tenacidade de um Adesivo em Solicitações de Modo Misto (I + II). PhD Thesis, Faculdade de Engenharia da Universidade do Porto, Julho de 2010.
• YE ZHU. Characterization of interlaminar fracture toughness of a carbon/epoxy composite material. MSc Thesis, The Pennsylvania State University, The Graduate School, Department of Engineering Science and Mechanics, May, 2009.
• ALEJANDRO A. ESCÁRPITA, HUGO ELIZALDE, RICARDO A. RAMÍREZ. Caracterizatíon de mecanismos de falla y propagacíon de dano en materiales compuestos - Parte I – Revisíon del estado del arte. Memorias Del XIII Congreso Internacional Anual De La Somim y Congreso Internacional De Metal Mecánica 2007 19 al 21 De Septiembre, 2007 DURANGO, DGO. MÉXICO, Paper ID: A3_148.
• DAVID J. POHLIT II. Dynamic Mixed-Mode Fracture of Bonded Composite Joints for Automotive Crashworthiness. MSc Thesis, Virginia Polytechnic Institute and State University, June 15, 2007, Blacksburg, Virginia.

• DAVIDSON, B.D., SEDILES, F.O. Mixed-mode I-II-III delamination toughness determination via a shear-torsion-bending test. Composites Part A: Applied Science and Manufacturing (2011) 42 (6), pp. 589-603.
• DAVIDSON B.D. Delamination Toughness Characterization of Laminated Composites. Encyclopedia of Aerospace Engineering. 2010 John Wiley & Sons.DOI: 10.1002/9780470686652.eae181
• DAVIDSON, B.D., SEDILES, F.O., HUMPHREYS, K.D. A shear-torsion-bending test for mixed-mode I-II-III delamination toughness determination. 25th Technical Conference of the American Society for Composites and 14th US-Japan Conference on Composite Materials 2010 2, pp. 1001-1020, 20-22 September 2010, Dayton, Ohio, USA.
• HORTENSIUS RUBEN, Development of a new mixed mode I-II-III delamination toughness test, 2009, Syracuse University Honors Program Capstone Projects. Paper 458.

• BOYANO A., MOLLÓN V., BONHOMME J., DE GRACIA J., ARRESE A., MUJIKA F. Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II. Engineering Fracture Mechanics 2015.
• DE GRACIA J., BOYANO A., ARRESE A., MUJIKA F. A new approach for determining the R-curve in dcb tests without optical measurements. Engineering Fracture Mechanics (2015) in press.
• BOYANO A., DE GRACIA J., ARRESE A., MUJIKA F. Saiakuntza konfigurazio berri baten analisia, konposite laminatuetan hausturaren I/II modu mistoa aztertzeko. Materialen Zientzia eta Teknologia II. Kongresua, Donostia, Universidad del Pais Vasco, 2014 (Spain).
• MLADENSKY A., RIZOV V. Analytical investigation of nonlinear interlaminar fracture in trilayered polymer composite beam under mode II crack loading conditions using the J -integral approach. Archive of Applied Mechanics 2013 (to appear).
• MANABU KUWATA. Mechanisms of Interlaminar Fracture Toughness Using Non-Woven Veils as Interleaf Materials PhD Thesis, Queen Mary, University of London, School of Engineering and Materials Science, Department of Materials, February 2010.
• NIKBAKHT M., CHOUPANI N. Characterization and Determination of Critical Interlaminar Fracture Toughness of Carbon-Epoxy with Arcan Specimen. Majlesi Journal of Mechanical Engineering. 2009, Vol. 2 No 3.
• NIKBAKHT, M., CHOUPANI, N., HOSSEINI, S.R. 2D and 3D interlaminar fracture assessment under mixed-mode loading conditions. Materials Science and Engineering A (2009) 516 (1-2), pp. 162-168.
• NIKBAKHT M., CHOUPANI N. Fracture toughness characterization of carbon-epoxy composite using Arcan specimen. World Academy of Science, Engineering and Technology 41 2008, 738-744.
• NIKBAKHT M., CHOUPANI N. Fracture toughness characterization of carbon-epoxy composite using Arcan specimen. International Journal of Mechanical, Industrial and Aerospace Engineering 2:4 2008, 247-253.
• NIKBAKHT M., CHOUPANI N. Numerical Investigation of Delamination in Carbon-Epoxy Composite using Arcan Specimen. International Journal of Mechanical, Industrial and Aerospace Engineering 2:4 2008, 259-266.
• PERTTU HINTIKKA. Determination of interlaminar fracture toughness of composite laminates. PhD Thesis. Helsinki University of Technology, 18 May 2009.

• Czarnocki P., Czajkowska K. Delamination resistance of laminate made with VBO MTM46/HTS prepreg. Acta Mechanica et Automatica (2015) 9(3); 173-177.
• RIZOV V. Fracture analysis of sandwich beam loaded in torsion. Engineering Mechanics (2015) 22(1);51–58.
• RIZOV V. Non-linear analysis of double cantilever beam. Strength, Fracture and Complexity (2015) 9;149–160.
• LI Y, LIU H. Loading rate effect on interlaminar fracture toughness. Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica (2015) 36(8), Pages 2620-2650.
• RIZOV V. , MLADENSKY A. Application of J -integral for investigation of elastic–plastic fracture in single cantilever beam. Archive of Applied Mechanics 2015 (to appear).
• VESCOVO A. Analisi del danneggiamento e stima della vita a fatica di giunzioni stampate in materiale composito. University of Padova, PhD Thesis, 2015.
• RIZOV V. Mixed-mode I/III fracture study of sandwich beams. Cogent Engineering 2(1) 2015, pp. 1-11.
• RIZOV V. Mixed-Mode II/III Fracture in Foam Core Sandwich Beams. Cellular Polymers, 2014.
• RIZOV V. Fracture in foam core composite sandwich beams under mixed-mode I/II/III loading conditions. Strength, Fracture and Complexity (2014) 8(3), 153-165.
• ALESSA H.A. Delamination in hybrid carbon/glass fiber composites. PhD thesis, 2014, The School of Engineering, University of Dayton, USA.
• BUDZIK M., JENSEN H.M. Bonded bimaterial ring under compressive load. Proceedings of the Institution of Mechanical Engineers (2013) (in press).
• MLADENSKY A., RIZOV V. Analytical investigation of nonlinear interlaminar fracture in trilayered polymer composite beam under mode II crack loading conditions using the J -integral approach. Archive of Applied Mechanics 2013 (to appear).
• SANS D.C. Advances in fibre bragg grating sensors for damage detedtion in composite laminates: application in quasi-static and fatigue delamination tests. PhD Thesis, University of Girona, Spain, 2013.
• BENNATI, S., FISICARO, P., VALVO, P.S. An enhanced beam-theory model of the mixed-mode bending (MMB) test - Part I: Literature review and mechanical model. Meccanica 48 (2), 2013, pp. 443-462.
• SANS D., STUTZ S., RENART J., MAYUGO J.A., BOTSIS J. Crack tip identification with long FBG sensors in mixed-mode delamination. Composite Structures 94 (9), 2012, pp. 2879-2887.
• JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R. Process zone in the Single Cantilever Beam under transverse loading. Part I: Theoretical analysis. Theoretical and Applied Fracture Mechanics (2011) 56;1, pp. 7-12.
• KIM S.-C., KIM J.S., YOON H.-J. Experimental and numerical investigations of mode I delamination behaviors of woven fabric composites with carbon, kevlar and their hybrid fibers. International Journal of Precision Engineering and Manufacturing 2011;12 (2), pp. 321-329.
• KIM S.-C., KIM J.S., YOON H.-J., SEO S.-I. Experimental study for mode II interlaminar fracture behavior of woven fabric carbon/epoxy composites. The First International Conference on Advances in Interaction & Multiscale Mechanics(AIMM' 10), Jeju, Korea, 31 May - 2 June, 2010, paper ID: 446084984952384, pp. 1252-1258.
• PLAIN, K.P., TONG, L. An experimental study on mode I and II fracture toughness of laminates stitched with a one-sided stitching technique. Composites Part A: Applied Science and Manufacturing (2011) 42 (2), pp. 203-210
• MANABU KUWATA. Mechanisms of Interlaminar Fracture Toughness Using Non-Woven Veils as Interleaf Materials PhD Thesis, Queen Mary, University of London, School of Engineering and Materials Science, Department of Materials, February 2010.
• DAVIDSON, B.D., BANSAL, A., QIDA BING, XUEKUN SUN. Geometrically nonlinear determination of energy release rate and mode ratio in single leg bending tests. Journal of Reinforced Plastics and Composites (2009) 28 (15), pp. 1881-1901
• LUO, Q., TONG, L. Fracture prediction of adhesively bonded structures using energy release rates. Journal of Adhesion Science and Technology (2009) 23 (10-11), pp. 1415-1440.
• PLAIN, K.P., TONG, L. The effect of stitch incline angle on mode I fracture toughness - Experimental and modelling. Composite Structures (2010) 92 (7), pp. 1620-1630.
• LUO, Q., TONG, L. Energy release rates for interlaminar delamination in laminates considering transverse shear effects. Composite Structures (2009) 89 (2), pp. 235-244.
• YOSHIHARA, H., SATOH, A. Shear and crack tip deformation correction for the double cantilever beam and three-point end-notched flexure specimens for mode I and mode II fracture toughness measurement of wood. Engineering Fracture Mechanics (2009) 76 (3), pp. 335-346.
• YE ZHU. Characterization of interlaminar fracture toughness of a carbon/epoxy composite material. MSc Thesis, The Pennsylvania State University, The Graduate School, Department of Engineering Science and Mechanics, May, 2009.
• SHAHIN, K., TAHERI, F. The strain energy release rates in adhesively bonded balanced and unbalanced specimens and lap joints. International Journal of Solids and Structures (2008) 45 (25-26), pp. 6284-6300.
• TENCHEV, R.T., FALZON, B.G. A correction to the analytical solution of the mixed mode bending (MMB) problem. Composites Science and Technology (2007) 67 (3-4), pp. 662-668.
• AVINASH RAMSAROOP. Fracture properties of fibre and nano reinforced composite structures. PhD Thesis. Durban University of Technology (2007) Department of Mechanical Engineering, Faculty of Engineering, Science and the Built Environment, Durban 4000, South Africa.
• STEFANO BENNATI, PAOLO FISICARO, PAOLO SEBASTIANO VALVO. An enhanced beam model of the mixed-mode bending (MMB) test. AIMETA 2007 - XVIII Congresso deii'Associazione Italina di Meccanica Teorica e Applicata. Brescia, 11-14 settembre 2007, Italy.
• OLSSON, R. On improper foundation models for the DCB specimen. ICCM International Conference on Composite Materials. July 8-13, 2007, Kyoto, Japan.

• AKAY M. An introduction to polymer-matrix composites. 2015, bookboon.com.
• FRANKLIN V.A., CHRISTOPHER T. Generation of R-Curve from 4ENF specimens: An experimental study. Manuscript, 2014.
• BEZNEA E.-F. CHIRICA I. Buckling behaviour of the delaminated sandwich plates under combined loads. Key Engineering Materials 601 (2014) pp. 88-91.
• POP A.P. , MITU L., BEJINARU M.G. General aspects concerning the delamination phenomenon in fiber reinforced polymeric biomaterials. Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume XI (XXI) (2012) NR1.
• Chadegani Alireza, Yang Chihdar, Smeltzer Stanley S. III. Adhesive-Bonded Composite Joint Analysis with Delaminated Surface Ply Using Strain-Energy Release Rate. Journal of Aircraft (2012) Volume: 49   Issue: 2, Pages: 503-520 (DOI: 10.2514/1.C031516)
• ROMHÁNY G., SZEBÉNYI G. Interlaminar fatigue crack growth behavior of MWCNT/carbon fiber reinforced hybrid composites monitored via newly developed acoustic emission method. eXPRESS Polymer Letters (2012) Vol.6, No.7, 572–580.
• SZEBÉNYI G. Szál és nanorészecske erõsítésû hibrid kompozitok kifejlesztése. PhD értekezés, Budapesti Mûszaki és gazdaságtudományi Egyetem, Gépészmérnöki Kar, 2011.
• MIEDERMANN P., SZEBÉNYI G., ROMHÁNY G. Szén nanocsõ/szénszál erõsítésû hibrid kompozit rétegközi I. törési módú fárasztó vizsgálata. Mûanyag és Gumi (2011) 48(11), 436-440.
• BELINGARDI G., BORIA S., SCATTINA A. Delaminazione sperimentale e numerica in laminati composito. AIAS - Associazione Italiana l'Analisi delle Sollecitazioni. 40o Convengo Nazionale, 7-10 Settembre 2011, Universita degli Stuid de Palermo. Paper ID:134.
• SHOKRIEH, M.M.,HEIDARI RARANI, M.RAHIMI, S. Numerical delermination of delamination onset in laminated symmetric DCB specimen. Journal of Solid Mechanics in Engineering, Winter 2010; 2(2):47-55.
• KUTNAR A, KAMKE FA, NAIRN JA, SERNEK M. Mode II fracture behavior of bonded viscoelastic thermal compressed wood. Wood and Fiber Science (2008) 40(3) pp.362-373.
• AGOSTINO CERIONI. Simulation of delamination in composite materials under static and fatigue loading by cohesive zone models. Universitá degli Studi di Cagliari, Facoltá di Ingegneria. Dipartimento di Ingegneria Meccanica. Dottorato di Ricerca in Progettazione Meccanica. XXI ciclo - SSD: ING-IND/14. Esame finale - A.A. 2007/2008 (PhD Thesis)
• KUTNAR A., KAMKE FREDERICK A., SERNEK M. Bonding of densified hybrid poplar with phenol formaldehyde adhesive. Proceedings of the 5th COST E34 International Workshop. Bled - Slovenia, September 6th, 2007. Edited by: Milan Sernek.

• GOVENDER R.A. Characterisation of glass fibre polypropylene and GFPP based fibre metal laminates at high strain rates. PhD Thesis, University of Cape Town, Department of Mechanical Engineering, Faculty of Engineering and the Built Environment, USA, December 2011.

• TABASSUM M., YE L., CHANG L., FRIEDRICH  K. Mode-I fracture behavior of a shear-thickening fluid as adhesive layer under different loading rates. Journal of Materials Science 2015, 50 (20), pp. 6642-6648.
• STAHL III J. J. Shear Pressed Aligned Carbon Nanotubes and their use as Composite and Adhesive Interlayers. PhD Thersis, Raleigh, North Carolina, 2015.
• AFSHAR A., DANESHYAR A. MOHAMMDI S. XFEM analysis of fiber bridging in mixed-mode crack propagation in composites. Composite Structures (2015) in press.
• DE GRACIA J., BOYANO A., ARRESE A., MUJIKA F. A new approach for determining the R-curve in dcb tests without optical measurements. Engineering Fracture Mechanics (2015) in press.
• FRANKLIN V.A., CHRISTOPHER T., RAO B.N. Influence of root rotation on delamination fracture toughness of composites. International Journal of Aerospace Engineering, Volume 2014 (2014), Article ID 829698, 12 pages.
• KAVEH A. Determining the crack propagation in DCB composite specimens by fiber bridging modeling. Revista Técnica de la Facultad de Ingeniería Universidad del Zulia 2014 Vol. 37, No 2, 1-9.
• KHANNA A., KOTOUSOV A. Stress analysis of a crack in a fiber-reinforced layered composite. Composite Structures 2014 (in press).
• GOODMILLER G.R., TERMAATH S. Investigation of composite patch performance under low-velocity impact loading. 55th AIAA/ASMe/ASCE/AHS/SC Structures, Structural Dynamics, and Materials Conference, National Harbor, Maryland, 2014
• GOODMILLER G.R. Investigation of composite patch performance under low-velocity impact loading. MSc thesis, University of Tennessee, Knoxville, USA, 12-2013.
• NATH A.G., BRITTO J.S.  Prediction of the crack propagation in DCB composite specimens through fiber bridging modeling. International Journal of Advanced Engineering Applications (2013), Vol.2, Iss.6, pp.48-56
• PENG L., XU J. Fatigue delamination growth of composite laminates with fiber bridging: Theory and simulation. 13th International Conference on Fracture, June 16-21, 2013, Beijing, China.
• FRANKLIN V.A., CHRISTOPHER T. Fracture energy estimation of DCB specimens made of glass/epoxy: An experimental study. Advances in Materials Science and Engineering (2013), in Press, Hindawi Publishing Corporation.
• PENG L., XU J., ZHANG J., ZHAO L. Mixed Mode Delamination Growth of Multidirectional Composite Laminates under Fatigue Loading. Engineering Fracture Mechanics (2012), in Press, accepted manuscript
• DIDIER F., NGAPGUE F., NSONGO T., MPESSA M., TAMO TATIETSE T. Mode I concrete characterization using rebar induction heating. International Journal of Engineering and Technology (2012) 4 (2) , pp. 71-81.
• FERET V., GHIASI H., HUBERT P. Effect of Fibre Volume Fraction on Mixed-Mode Fracture of a Fabric Carbon/Epoxy Composite. Applied Composite Materials (2012) DOI: 10.1007/s10443-012-9276-5.
• ANYFANTIS K. N. Analysis and Design of Composite-to-Metal Adhesively Bonded Joints. PhD Thesis, Athen, National Technical Universoty of Athens, Scholl of Naval Architechture and Marine Engineering (2012).
• SHOKRIEH, M.M., HEIDARI-RARANI, M., AYATOLLAHI, M.R. Delamination R-curve as a material property of unidirectional glass/epoxy composites. Materials and Design (2012) 34, pp. 211-218
• NICHOLAS G. TSOUVALIS. Determination of the fracture process zone under mode I fracture in glass fiber composites. Journal of Composite Materials, May 24, 2011. doi: 10.1177/0021998311401934.
• PENG, L., ZHANG, J., ZHAO, L., BAO, R., YANG, H., FEI, B. Mode I delamination growth of multidirectional composite laminates under fatigue loading. Journal of Composite Materials 2011;45 (10), pp. 1077-1090.
• LAUREN A. BURNS. Tree joints: biometric insights for aerospace composite joints. 27th Intenational Congress of the Aeronautical Sciences (ICAS2010). Nice, France, 19-24 September 2010.
• XEPAPADAKI A. Effect of damage due to different damage sources on the mechanical behavior of composites materials. University of Patras, Greece, Nemertes, 2010 Link
• ZHANG, J., FOX, B.L. Manufacturing influence on the delamination fracture behavior of the T800H/3900-2 carbon fiber reinforced polymer composites. Materials and Manufacturing Processes (2007) 22 (6), pp. 768-772.
• SORENSEN, L., BOTSIS, J., GMU?R, T., CUGNONI, J. Delamination detection and characterisation of bridging tractions using long FBG optical sensors. Composites Part A: Applied Science and Manufacturing (2007) 38 (10), pp. 2087-2096.
• LARISSA SORENSEN. The response of embedded FBG sensors to nonuniform strains in CFRP composites during processing and delamination. PhD Thesis, Lausanne, ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL) 2007.
• AYMERICH F, CERIONI A., PRIOLO P. Studio della delaminazione nei laminati compositi mediante elementi coesivi di interfaccia. Link

• HASPEL B. Werkstoffanalytische Betrachtung der Eigenschaften von mittels neuartiger RTM-Fertigungsprozesse hergestellten glasfaserverstärkten Polymerverbunden. PhD Thesis, 2014. Karlsruher Institut für Technologie (KIT), KIT Scientific Publishing
• WANG J.J. Fracture failure criteria for core soil under I-II mixed modes, in: Hydraulic Fracturing in Earth-Rock Fill DAMS, (2014) John Wiley & Sons, Singapore Pte. Ltd, Singapore. doi: 10.1002/9781118725542.ch5
• MLADENSKY A. Investigation of cracks in composite materials. PhD thesis, University of Architecture, Civil Engineering and Geodesy, Sofia, 2013, p. 210 (in Bulgarian).
• YE ZHU. Characterization of interlaminar fracture toughness of a carbon/epoxy composite material. MSc Thesis, The Pennsylvania State University, The Graduate School, Department of Engineering Science and Mechanics, May, 2009.
• KUTNAR A, KAMKE FA, NAIRN JA, SERNEK M. Mode II fracture behavior of bonded viscoelastic thermal compressed wood. Wood and Fiber Science (2008) 40(3) pp.362-373.
• LAFFAILLE J.-M. Effect of Z-pinning on the delamination crack propagation under fatigue loading conditions. 09/01/2007. Crainfield University, United Kingdom, MSc Thesis.
• HAMEY, COLE S. Mechanics of Bi-Material Beams and Its Application to Mixed-mode Fracture of Wood-FRP Bonded Interfaces. PhD Thesis. The Graduate Faculty of The University of Akron. August, 2007.

• SILVA F. G. A., de MOURA M. F. S. F., DOURADO N., XAVIER J., PEREIRA F. A. M., MORAIS J. J. L.,  DIAS M. I. R. (2015). Mixed-mode I+ II fracture characterization of human cortical bone using the Single Leg Bending test. Journal of the Mechanical Behavior of Biomedical Materials (2015) (in press).
• CAVAILERO P.M.L.. Fracture characterization  of  a  hybrid  cork/carbon-epoxy  laminate under mixed-mode I+II loading conditions. MSc thesis, University of Porto, 2015.
• DE MOURA M.F.S.F., CONCALVES J.P.M., Cohesive zone model for high-cycle fatigue of composite bonded joints under mixed-mode I+II loading, Engineering Fracture Mechanics, Available online 2 April 2015
• NECHO, J.P.C. Fractura em modo misto de ligaçoes coladas em madeira. Universidade de Trás-os-Montes e Alto Douro. PhD thesis, Portugal, March 23, 2015.
• ALESSA H.A. Delamination in hybrid carbon/glass fiber composites. PhD thesis, 2014, The School of Engineering, University of Dayton, USA.
• SALEM N.B., JUMEL, J., BUDZIK, M.K., SHANAHAN, M.E.R., LAVELLE F. Analytical and experimental investigations of crack propagation in adhesively bonded joints with the mixed mode bending (MMB) test Part I: Macroscopic analysis & digital image correlation measurements. Theoretical and Appleid Fracture Mechanics (in press) 2014.
• PEREIRA F.A.M., MOURA M.F.S.F., DOURADO N., MORAIS J.J.L., DIAS M.I.R. Bone fracture characterization under mixed-mode I+II loading using the single leg bending test. Biomechanics and Modeling in Mechanobiology 2014 (in press).
• CHAVES F.J.P., DA SILVA L.F.M., DE MOURA M.F.S.F., DILLARD D.A., ESTEVES V.H.C. Fracture Mechanics Tests in Adhesively Bonded Joints: A Literature Review. The Journal of Adhesion 2013, November (in press).
• LUIZ F.F. Fratura do tecido ósseo cortical de bovino jovem em modo misto usando o ensaio SLB. Universidade de Trás-os-Montes e Alto Douro. PhD thesis, Portugal, 2013.
• FERNÁNDEZ M.V. Fracture characterization of composite bonded joints under fatigue loading. PhD Thesis, 2013, University of Porto, Faculty of Engineering, Portugal.
• FERNÁNDEZ M.V. , DE MOURA M. F. S. F., DA SILVA L. F. M., MARQUES A.T. Mixed-mode fatigue/fracture characterization of composite bonded joints using the Single-Leg Bending test. Composites Part A - Applied Science and Manufacturing 44 (1), 2013, pp. 63-69.
• CHEN F. Interface mechanics of layered composite beam-type structures. PhD Thesis. Washington State University, Department of Civil and Environmental Engineering, august 2011.
• DE MOURA, M.F.S.F., GUEDES R.M., LUIGI N. Wiley Encyclopedia of Composites - Interlaminar Fracture. John Wiley & Sons, Inc., 2011. DOI:10.1002/9781118097298.weoc095
• PIRONDI, A., MORONI, F. Simulation of mixed-mode I/II fatigue crack propagation in adhesive joints with a modified cohesive zone model. Journal of Adhesion Science and Technology (2011) 25;18, pp. 2483-2499.
• DA SILVA, LFM, ESTEVES, VHC, CHAVES, FJP. Fracture toughness of a structural adhesive under mixed mode loadings. Materialwissenschaft und Werkstofftechnik 2011;42(5), pp. 460-470.
• QIAO, P., CHEN, F. On the compliance and energy release rate of generically-unified beam-type fracture specimens. Journal of Composite Materials (2011) 45 (1), pp. 65-101.
• ZHANG Y. Fracture and Fatigue of Adhesively-Bonded Fiber-Reinforced Polymer Structural Joints. PhD Thesis, Lausanne, ÉCOLE POLYTECHNIQUE FÉDÉRALE DE LAUSANNE (EPFL) (2010).
• MANABU KUWATA. Mechanisms of Interlaminar Fracture Toughness Using Non-Woven Veils as Interleaf Materials PhD Thesis, Queen Mary, University of London, School of Engineering and Materials Science, Department of Materials, February 2010.
• ESTEVEZ V. H. C.. Determinação da Tenacidade de um Adesivo em Solicitações de Modo Misto (I + II). PhD Thesis, Faculdade de Engenharia da Universidade do Porto, Julho de 2010.
• DAVIDSON, B.D., BANSAL, A., QIDA BING, XUEKUN SUN. Geometrically nonlinear determination of energy release rate and mode ratio in single leg bending tests. Journal of Reinforced Plastics and Composites (2009) 28 (15), pp. 1881-1901.
• ZHANG, Y., VASSILOPOULOS, A.P., KELLER, T. Mode I and II fracture behavior of adhesively-bonded pultruded composite joints. Engineering Fracture Mechanics (2010) 77 (1), pp. 128-143.
• OLIVEIRA, J.M.Q., DE MOURA, M.F.S.F., MORAIS, J.J.L. Application of the end loaded split and single-leg bending tests to the mixed-mode fracture characterization of wood. Holzforschung (2009) 63 (5), pp. 597-602.
• BRUNNER, A.J., BLACKMAN, B.R.K., DAVIES, P. A status report on delamination resistance testing of polymer-matrix composites. Engineering Fracture Mechanics (2008) 75 (9), pp. 2779-2794.
• DAVIDSON, B.D., BANSAL, A., BING, Q., SUN, X. Linear and nonlinear finite element analyses of unidirectional, symmetric single leg four-point bending tests. Engineering Fracture Mechanics (2008) 75 (8), pp. 2130-2143.
• HAMEY, COLE S. Mechanics of Bi-Material Beams and Its Application to Mixed-mode Fracture of Wood-FRP Bonded Interfaces. PhD Thesis. The Graduate Faculty of The University of Akron. August, 2007.
• AGOSTINO CERIONI. Simulation of delamination in composite materials under static and fatigue loading by cohesive zone models. Universitá degli Studi di Cagliari, Facoltá di Ingegneria. Dipartimento di Ingegneria Meccanica. Dottorato di Ricerca in Progettazione Meccanica. XXI ciclo - SSD: ING-IND/14. Esame finale - A.A. 2007/2008 (PhD Thesis)
• AYMERICH F, CERIONI A., PRIOLO P. Studio della delaminazione nei laminati compositi mediante elementi coesivi di interfaccia. Link

• RIZOV V. Non-linear analysis of double cantilever beam. Strength, Fracture and Complexity (2015) 9;149–160.
• RIZOV V. , MLADENSKY A. Application of J -integral for investigation of elastic–plastic fracture in single cantilever beam. Archive of Applied Mechanics 2015 (to appear).
• RIZOV V. , MLADENSKY A. Elastic-plastic analysis of Asymmetric double cantilever beam specimen. International Journal of Mechanical Sciences 2014 (to appear).

• ALESSANDRO CANNAS, IAN BOND, AMIR REZA, MATTEO LUSI. Mode-II interlaminar fracture investigation of novel shaped glass fibre composites. ICCM International Conference on Composite Materials. July 8-13, 2007, Kyoto, Japan.

• MIKLASHEVICH I.A. PhD Thesis. 2004. Link
• MIKLASHEVICH I.A. Delamination of composites along the interface as buckling failure of the stressed layer, Mechanics of Composite Materials (2004) 40 (4): pp. 279-286 Jul-Aug.

• RIZOV V. , MLADENSKY A. Application of J -integral for investigation of elastic–plastic fracture in single cantilever beam. Archive of Applied Mechanics 2015 (to appear).
• MLADENSKY A., RIZOV V. Non-linear fracture study of Single Cantilever Beam specimen. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik 2014 (to appear).
• TRAN A. T. Étude du délaminage en mode II de composites unidirectionels soumis á des sollicitaions rapides: approche globale et approche locale. École National Supérieure d'Arts et Métiers.Doctorat Paristech. Thése, Le 24 Juin 2011, (PhD Thesis).
• ELWAZERY M., ABO EL-NASR A., EL-BESHTAWI I., AYAD M. Crack Growth Behavior in 2024-T4 Al Alloy under Mixed-mode Loading. Fourth Assiut University International Conference on Mechanical Engineering Advanced Technology for Industrial Production, 12-14 December, (2006), Assiut, pp. 243-251.
• MACKERLE, J. Finite element modelling of ceramics and glass, an addendum – a bibliography (1998-2004), Engineering Computations, Vol. 22 Iss: 3, (2005) pp.297 - 373.

• STAHL J.J., BOGDANOVICH A.E., BRADFORD P.D. Carbon Nanotube Shear-Pressed Sheet Interleaves for Mode I Interlaminar Fracture Toughness Enhancement. Composites Part A: Applied Science and Manufacturing, 2015 (in press).
• STAHL III J. J. Shear Pressed Aligned Carbon Nanotubes and their use as Composite and Adhesive Interlayers. PhD Thersis, Raleigh, North Carolina, 2015.
• CASTELLANOS A., ISLAM MD. S., QUEVEDO S., ISHUVO M.A.i., LIN Y., PRABHAKAR P. Stiffnening of woven composites for enhancing mode-I interlmainar fracture toughness. 5th Southwest Energy Science & Engineering Symposium. Saturday, April 4th, 2015, Texas, El Paso, USA.
• SANTHANAM V., CHANDRASEKARAM M. Studies on fracture toughness of banana-glass fibre hybrid composite. Indian Journal of Engineering Volume 11, Number 26, November 12, 2014.
• HOFMANN S. Effect of interlaminar defects on the mechanical behaviour of carbon fibre reinforced silicon carbide. PhD thesis, 2013, Institute of Aircraft Design, University of Stuttgart, Germany.
• SARLIN E., VUORINEN J., VIPPOLA M., LEPISTÖ T. The effect of rubber thickness and load rate on the interfacial fracture energy in steel/rubber/composite hybrid structures. 19th International Conference on Composite Materials (2013) July 28 - August 2. Canada, Montréal.
• POP A.P. , MITU L., BEJINARU M.G. General aspects concerning the delamination phenomenon in fiber reinforced polymeric biomaterials. Annals of the Oradea University, Fascicle of Management and Technological Engineering, Volume XI (XXI) (2012) NR1.
• LAFFAN M.J., PINHO S.T., ROBINSON P., MCMILLAN A.J. Translaminar fracture toughness testing of composites: A review. Polymer Testing (2012) 31, 481–489.
• SARLIN E., LUUKONEN A., VIPPOLA M., VUORINEN J., LEPISTÖ T.K. Failure behavior of a three-layer steel/rubber/FRP hybrid structure. 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010, 15-18 November 2010, Taipei, Taiwan.
• RANJBARAN M.M. Experimental investigation of fracture toughness in Al 356-SiCp aluminium matrix composite. American Journal of Scientific and Indutrial Research (2010) 1(3), 549-557.
• KIM S.L., KIM J.S., YOON H.J., SEO S.-I. A Study on Sliding Shear(Mode II) Delamination of Woven Fabric composites for Carbody Structure. Korean Society for Railway, 2010.7, 557-563.
• A study on applications for railway of composite materials. KRRI, 2010-124, 2010.11
• KIM S.L., KIM J.S., YOON H.J., SEO S.-I. A Study on Numerical Analysis for Mode II Delamination of Woven Fabric carbon/epoxy composites for Carbody Structure. Korean Society for Railway, 2009.11, 2281-2287.
• KIM S.L., KIM J.S., YOON H.J., SEO S.-I. Finite Element Analysis and Validation for Mode I Interlaminar Fracture Behavior of Woven Fabric Composite for a Train Carbody Using CZM (Cohesive Zone Model). Korean Society for Railway, Journal of the Korean Society for Railway, Vol.12 No.5 (WN.54) 2009.10, 719-724.
• HOA H.P. Analyse de l'influence de la configuration sur le comportement en statique d'un profilé en T, fait de composite thermoplastique á haute résistance et fibre carbone. École de Technologie Supérieur, Université du Québec, le 23 Juin, 2009, Montréal (PhD Thesis).
• BOU S.F. Aplicación del análisis de imágenes a la determinación de la orientación de fibra larga de vidrio en diferentes condiciones de proceso. PhD Thesis, Universidad Politécnica De Valencia Departamento De Inhéniería Mecánica Y De Materiales, 2007, June.
• LAFFAILLE J.-M. Effect of Z-pinning on the delamination crack propagation under fatigue loading conditions. 09/01/2007. Crainfield University, United Kingdom, MSc Thesis.
• MARANNANO, G.V., PASTA A. An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates. Conference Information: 34th National Conference of the Italian-Association-for-Stress Analysis, SEP 14-17, 2005 Politecn Milano, Milan, ITALY. Source: Engineering Fracture Mechanics  (2007) 74(4) pp. 612-626.
• CIRELLO, A., MARANNANO, G.V., PASTA, A. Photoelastic analysis on samples loaded on MMB test rig. ICEM12 - 12th International Conference on Experimental Mechanics. 29 August - 2 September, 2004 Politechnico di Bari, Italy.
• CIRELLO A, PASTA A., MARANNANO G.V.  Indagine numerico-sperimentale sul meccanismo di propagazione di un difetto in un materiale composito. XXXII Convegno Nazionale AIAS. 3 - 6 settembre. Salerno, Italy, (2003) CD-ROM.

• CHOWDHURY N. T., WANG J., CHIU W. K., YAN, W. Matrix Failure in Composite Laminates under Tensile Loading. Composite Structures (2015) (in press).
• GALLARDO, P.A.L. Static and Fatigue Analysis of Wind Turbine Blades Subject to Cold Weather Conditions Using Finite Element Analysis. MSc Thesis, University of Victoria, Department of Mechanical Engineering, (2011).
• KOTTARI A., CHARALAMPAKIS A.E., KOUMOUSIS V.K. Degrading Bouc-Wen Models compatible with Plasticity Postulates. 9th International Congress on Mechanics, Limassol, Cyprus, 12-14 July, 2010, 10 pages.
• KIM B. R., LEE H. K., Editor: DOUGHETT A., ASNAREZ P. Micromechanical Analysis for Laminated Composite Materials, in: COMPOSITE LAMINATES: PROPERTIES, PERFORMANCE AND APPLICATIONS  Book Series: Materials Science and Technologies, Pages: 201-232, NOVA, 2010.
• MACKERLE, J. Finite element modelling of ceramics and glass, an addendum – a bibliography (1998-2004), Engineering Computations, Vol. 22 Iss: 3, (2005) pp.297 - 373.