/ZOOM

/ZOOM, WN, Lab, X1, Y1, X2, Y2
Zooms a region of a display window.

Compatible Products: – | Pro | Premium | Enterprise | Ent PP | Ent Solver | DYNA

WN

Window number to which command applies (defaults to 1).

Lab

Label to define the desired type of zoom:

OFF

 — 

Turns zoom off (refits image of entire model to the window).

BACK

 — 

Goes back to previous zoom setting (five successive back ups, maximum).

SCRN

 — 

Interprets X1,Y1 as the screen coordinates of the center of a square zoom region; X2,Y2 as the screen coordinates of a point on one side of that square.

RECT

 — 

Interprets X1,Y1 and X2,Y2 as the screen coordinates of two opposite corners of a rectangular zoom region.

Notes

Zooms (centers and magnifies) the specified region of a display window. /ZOOM will operate on a display that has been formed by an explicit graphics action command (APLOT, EPLOT, etc.). /ZOOM has no effect on an "immediate" graphics display. When /ZOOM is executed, the display is automatically replotted such that the specified zoom region is centered and sized to fill the window.

Auto resizing is disabled when you issue the /ZOOM command. To restore auto resizing, issue the /AUTO command, or select FIT from the Pan, Zoom, Rotate box.

This command is valid in any processor.

Menu Paths

Utility Menu>PlotCtrls>Pan, Zoom, Rotate

Release 18.2 - © ANSYS, Inc. All rights reserved.