*VFILL, ParR, Func, CON1, CON2, CON3, CON4, CON5, CON6, CON7, CON8, CON9, CON10
Fills an array parameter.
ParRThe name of the resulting numeric array parameter vector. See *SET for name restrictions.
FuncFill function:
Assign specified values CON1, CON2, etc. to successive
array elements. Up to 10 assignments may be made at a time. Any CON values after a blank CON value are ignored.
Assign ramp function values: CON1+((n-1)*CON2) , where
n is the loop number [*VLEN]. To specify a constant
function (no ramp), set CON2 to zero.
Assign random number values
based on a uniform distribution RAND(CON1,CON2), where:
CON1 is the lower bound (defaults
to 0.0) |
CON2 is the upper bound (defaults
to 1.0) |
Assign random sample of Gaussian
distributions GDIS(CON1,CON2) where:
CON1 is the mean (defaults to 0.0) |
CON2 is the standard deviation
(defaults to 1.0) |
Assigns random number values based
on a triangular distribution TRIA(CON1,CON2,CON3) where:
CON1 is the lower bound (defaults
to 0.0) |
CON2 is the location of the peak
value (CON1 ≤ CON2 ≤CON3; CON2 defaults to 0 if CON1 ≤ 0 ≤ CON3, CON1 if 0 ≤ CON1, or CON3 if CON3 ≤ 0) |
CON3 is the upper bound (defaults
to 1.0 + CON1 if CON1 ≥ 0 or 0.0 if CON1 ≤
0) |
Assigns random number values based
on a beta distribution BETA(CON1,CON2,CON3,CON4) where:
CON1 is the lower bound (defaults
to 0.0) |
CON2 is the upper bound (defaults
to 1.0 + CON1 if CON1 ≥ 0 or 0.0 if CON1 ≤
0) |
CON3 and CON4 are the alpha and beta parameters, respectively, of the beta function.
Alpha and beta must both be positive; they default to 1.0. |
Assigns random number values based
on a gamma distribution: GAMM(CON1,CON2,CON3) where:
CON1 is the lower bound (defaults
to 0.0) |
CON2 and CON3 are the alpha and beta parameters, respectively, of the gamma function.
Alpha and beta must both be positive; they default to 1.0. |
Generates the rigid body modes with respect to the reference point coordinates
(CON1, CON2,
CON3). The dimensions of the array parameter
ParR are
(dim1,dim2) where
dim1 is the maximum node number (including internal nodes but excluding orientation nodes) multiplied by the number of
degrees of freedom, and dim2 is the number of rigid body modes
(which corresponds to the number of structural degrees of freedom).
Generates excitation frequencies
with clustering option CLUSTER(CON1,CON2,CON3,CON4,%CON5%) where:
CON1 is the lower end of the frequency
range in Hz (0 < CON1) |
CON2 is the upper end of the frequency
range in Hz (CON1 < CON2) |
CON3 is the number of points on
each side of the natural frequency (4 ≤ CON3 ≤ 20, defaults to 4) |
CON4 is the constant damping ratio
value or an array parameter (size NFR) specifying the damping ratios
(if zero or blank, defaults to constant damping ratio of 0.005) |
CON5 is an array parameter (size
NFR) specifying the natural frequencies in Hz |
The dimension of the resulting array parameter ParR is less than
2+NFR*(2*CON3+1) where NFR is the number
of natural frequencies defined in CON5.
CON1, CON2, CON3, . . . , CON10Constants used with above functions.
Operates on input data and produces one output array parameter vector according to:
ParR = f(CON1, CON2, ...)
where the functions (f) are described above. Operations use successive array elements [*VLEN, *VMASK] with the default being all successive elements. For example, *VFILL,A,RAMP,1,10 assigns A(1) = 1.0, A(2) = 11.0, A(3) = 21.0, etc. *VFILL,B(5,1),DATA,1.5,3.0 assigns B(5,1) = 1.5 and B(6,1) = 3.0. Absolute values and scale factors may be applied to the result parameter [*VABS, *VFACT]. Results may be cumulative [*VCUM]. See the *VOPER command for details.
This command is valid in any processor.