NSOL, NVAR, NODE, Item, Comp, Name, SECTOR
Specifies nodal data to be stored from the results file.
NVARArbitrary reference number or name assigned to this
variable. Variable numbers can be 2 to NV (NUMVAR) while the name can be an eight byte
character string. Overwrites any existing results for this variable.
NODENode for which data are to be stored.
ItemLabel identifying the item. Valid item labels are shown in the table below. Some items also require a component label.
CompComponent of the item (if required). Valid component labels are shown in the table below.
NameThirty-two character name identifying the item on
printouts and displays. Defaults to a label formed by concatenating
the first four characters of the Item and Comp labels.
SECTORFor a full harmonic cyclic symmetry solution, the sector number for which the results from NODE are to be stored.
Stores nodal degree of freedom and solution results in a variable. For more information, see Data Interpreted in the Nodal Coordinate System in the Modeling and Meshing Guide.
For SECTOR>1, the result is in
the nodal coordinate system of the base sector, and it is rotated
to the expanded sector’s location. Refer to Using the /CYCEXPAND Command in the Cyclic Symmetry Analysis Guide for
more information.
Table 201: NSOL - Valid Item and Component Labels
Valid Item and
Component Labels NSOL, NVAR,NODE,Item,Comp,Name | ||
|---|---|---|
| Valid item and component labels for nodal degree of freedom results are: | ||
| Item | Comp | Description |
| U | X, Y, Z | X, Y, or Z structural displacement. |
| ROT | X, Y, Z | X, Y, or Z structural rotation. |
| TEMP[1] | Temperature. | |
| PRES | Pressure. | |
| VOLT | Electric potential. | |
| MAG | Magnetic scalar potential. | |
| V | X, Y, Z | X, Y, or Z fluid velocity in a fluid analysis. |
| A | X, Y, Z | X, Y, or Z magnetic vector potential in an electromagnetic analysis. |
| CONC | Concentration. | |
| VEL | X, Y, Z | X, Y, or Z velocity in a structural transient dynamic analysis (ANTYPE,TRANS). |
| ACC | X, Y, Z | X, Y, or Z acceleration in a structural transient dynamic analysis (ANTYPE,TRANS). |
| OMG | X, Y, Z | X, Y, or Z rotational velocity in a structural transient dynamic analysis (ANTYPE,TRANS). |
| DMG | X, Y, Z | X, Y, or Z rotational acceleration in a structural transient dynamic analysis (ANTYPE,TRANS). |
| CURR | Current. | |
| EMF | Electromotive force drop. | |
| SPL | Sound pressure level. | |
| SPLA | A-weighted sound pressure level (dBA). | |
Table 202: NSOL - Valid Item and Component Labels for ANSYS LS-DYNA Nodal Results
| Item | Comp | Description |
|---|---|---|
| U | X, Y, Z | X, Y, or Z nodal displacements. |
| ROT | X, Y, Z | X, Y, or Z nodal rotations. |
| V | X, Y, Z | X, Y, or Z nodal velocities. |
| A | X, Y, Z | X, Y, or Z nodal accelerations. |