Table of Contents
- M - Defines master degrees of freedom for superelement generation
analyses.
- MAGOPT - Specifies options for a 3-D magnetostatic field analysis.
- MAGSOLV - Specifies magnetic solution options and initiates the
solution.
- /MAIL - Mails file to the specified address.
- MAP - Maps pressures from source points to target surface elements.
- /MAP - Enters the mapping processor.
- MAP2DTO3D - Initiates a 2-D to 3-D analysis and maps variables.
- MAPSOLVE - Maps solved node and element solutions from an original
mesh to a new mesh.
- MAPVAR - Defines tensors and vectors in user-defined state variables
for rezoning and in 2-D to 3-D analyses.
- MASCALE - Activates scaling of the entire system matrix.
- MASTER - Specifies "Master DOF" as the subsequent status topic.
- MAT - Sets the element material attribute pointer.
- MATER - Specifies "Material properties" as the subsequent status topic.
- MCHECK - Checks mesh connectivity.
- MDAMP - Defines the damping ratios as a function of mode.
- MDELE - Deletes master degrees of freedom.
- MDPLOT - Plots frequency-dependent modal damping coefficients calculated
by DMPEXT.
- MEMM - Allows the current session to keep allocated memory
- /MENU - Activates the Graphical User Interface (GUI).
- *MERGE - Merges two dense matrices or vectors into one.
- MESHING - Specifies "Meshing" as the subsequent status topic.
- MFANALYSIS - Activates or deactivates an ANSYS Multi-field solver analysis.
- MFBUCKET - Turns a bucket search on or off.
- MFCALC - Specifies a calculation frequency for a field in an ANSYS Multi-field solver analysis.
- MFCI - Sets the control parameters used by the conservative (CPP)
interpolation scheme.
- MFCLEAR - Deletes ANSYS Multi-field solver analysis settings.
- MFCMMAND - Captures field solution options in a command file.
- MFCONV - Sets convergence values for an ANSYS Multi-field solver analysis.
- MFDTIME - Sets time step sizes for an ANSYS Multi-field solver analysis.
- MFELEM - Defines a field by grouping element types.
- MFEM - Add more element types to a previously defined field number.
- MFEXTER - Defines external fields for an ANSYS Multi-field solver analysis.
- MFFNAME - Specifies a file name for a field in an ANSYS Multi-field solver analysis.
- MFFR - Setup Multi-Field relaxation factors for field solutions.
- MFIMPORT - Imports a new field into a current ANSYS Multi-field solver analysis.
- MFINTER - Specifies the interface load transfer interpolation option
for an ANSYS Multi-field solver analysis.
- MFITER - Sets the number of stagger iterations for an ANSYS Multi-field solver analysis.
- MFLCOMM - Defines a load transfer for code coupling analyses.
- MFLIST - Lists the settings for an ANSYS Multi-field solver analysis.
- MFMAP - Calculates, saves, resumes, or deletes mapping data in
an ANSYS Multi-field solver analysis.
- MFORDER - Specifies field solution order for an ANSYS Multi-field solver analysis.
- MFOUTPUT - Specifies results file output frequency for an ANSYS Multi-field solver analysis.
- *MFOURI - Calculates the coefficients for, or evaluates, a Fourier series.
- MFPSIMUL - Sets up a field solver group to simultaneously process
with code coupling analyses.
- MFRC - Controls file writing for multiframe restarts for the ANSYS Multi-field solver.
- MFRELAX - Sets relaxation values for an ANSYS Multi-field solver analysis.
- MFRSTART - Specifies restart status for an ANSYS Multi-field solver analysis.
- MFSORDER - Sets up the solution sequence of simultaneous field solver
groups for code coupling analyses.
- MFSURFACE - Defines a surface load transfer for an ANSYS Multi-field solver analysis.
- MFTIME - Sets end time for an ANSYS Multi-field solver analysis.
- MFTOL - Activates or deactivates normal distance checking for
surface mapping in an ANSYS Multi-field solver analysis.
- *MFUN - Copies or transposes an array parameter matrix.
- MFVOLUME - Defines a volume load transfer for an ANSYS Multi-field solver analysis.
- MFWRITE - Writes an ANSYS master input file for MFX multiple
code coupling.
- MGEN - Generates additional MDOF from a previously defined set.
- MIDTOL - Sets midstep residual criterion values for structural transient
analyses.
- /MKDIR - Creates a directory.
- MLIST - Lists the MDOF of freedom.
- MMASS - Specifies the missing mass response calculation.
- MMF - Calculates the magnetomotive force along a path.
- MODCONT - Specify additional modal analysis options.
- MODDIR - Activates the remote read-only modal files usage.
- MODE - Specifies the harmonic loading term for this load step.
- MODIFY - Changes the listed values of the data in a set.
- MODMSH - Controls the relationship of the solid model and the FE model.
- MODSELOPTION - Specifies the criteria for selecting the modes to be expanded.
- MODOPT - Specifies modal analysis options.
- MONITOR - Controls contents of three variable fields in nonlinear
solution monitor file.
- *MOPER - Performs matrix operations on array parameter matrices.
- MOPT - Specifies meshing options.
- MORPH - Specifies morphing and remeshing controls.
- MOVE - Calculates and moves a node to an intersection.
- MP - Defines a linear material property as a constant or a
function of temperature.
- MPAMOD - Modifies temperature-dependent secant coefficients of thermal
expansion.
- MPCHG - Changes the material number attribute of an element.
- MPCOPY - Copies linear material model data from one material reference
number to another.
- MPDATA - Defines property data to be associated with the temperature
table.
- MPDELE - Deletes linear material properties.
- MPDRES - Reassembles existing material data with the temperature table.
- /MPLIB - Sets the default material library read and write paths.
- MPLIST - Lists linear material properties.
- MPPLOT - Plots linear material properties as a function of temperature.
- MPREAD - Reads a file containing material properties.
- MPRINT - Specifies that radiation matrices are to be printed.
- MPTEMP - Defines a temperature table for material properties.
- MPTGEN - Adds temperatures to the temperature table by generation.
- MPTRES - Restores a temperature table previously defined.
- MPWRITE - Writes linear material properties in the database to a file (if
the LIB option is not specified) or writes both linear and nonlinear material
properties (if LIB is specified) from the database to a file.
- /MREP - Enables you to reissue the graphics command macro "name" during
a replot or zoom operation.
- MRPM - Defines the revolutions per minute (RPM) for a machine rotation.
- MSAVE - Sets the solver memory saving option.
This option only applies to the PCG solver (including PCG Lanczos).
- *MSG - Writes an output message via the ANSYS message subroutine.
- MSHAPE - For elements that support multiple shapes, specifies the element
shape to be used for meshing.
- MSHCOPY - Simplifies the generation of meshes that have matching node element
patterns on two different line groups (in 2-D) or area groups (3-D).
- MSHKEY - Specifies whether free meshing or mapped meshing should be used
to mesh a model.
- MSHMID - Specifies placement of midside nodes.
- MSHPATTERN - Specifies pattern to be used for mapped triangle meshing.
-
MSOLVE
- Starts multiple solutions for an acoustic analysis.
- /MSTART - Controls the initial GUI components.
- MSTOLE - Adds two extra nodes from FLUID116 elements to SURF151 or SURF152 elements for convection analyses.
- *MULT - Performs the matrix multiplication M3 = M1(T1)*M2(T2).
- *MWRITE - Writes a matrix to a file in a formatted sequence.
- MXPAND - Specifies the number of modes to expand and write for
a modal or buckling analysis.