DOF

DOF, Lab1, Lab2, Lab3, Lab4, Lab5, Lab6, Lab7, Lab8, Lab9, Lab10
Adds degrees of freedom to the current DOF set.

Compatible Products: – | Pro | Premium | Enterprise | Ent PP | Ent Solver | DYNA

Lab1, Lab2, Lab3, . . . , Lab10

Valid labels are: UX, UY, UZ (structural displacements); ROTX, ROTY, ROTZ (structural rotations); TEMP, TBOT, TE2, TE3, . . ., TTOP (temperatures); PRES (pressure); VOLT (voltage); MAG (magnetic scalar potential); AZ (magnetic vector potential); CURR (current); EMF (electromotive force drop); CONC (concentration); DELETE.

Command Default

Use degree of freedom set determined from element types.

Notes

The degree of freedom (DOF) set for the model is determined from all element types defined. This command may be used to add to the current set. The ALL label may be used on some commands to represent all labels of the current degree of freedom set for the model. Issue the DOF command with no arguments to list the current set. Use the DELETE label to delete any previously added DOFs and return to the default DOF set.

Product Restrictions

Command Option LabAvailable Products
Ux, Uy,Uz, Rx,Ry,Rz Pro | Premium | Enterprise | Ent PP | Ent Solver | –
MAG, VOLT Pro | Premium | Enterprise | Ent PP | Ent Solver | –
Ax,Ay,Az – | – | Enterprise | Ent PP | Ent Solver | –
PRES – | – | Enterprise | Ent PP | Ent Solver | –
TEMP,TBOT, TE2,TE3 Pro | Premium | Enterprise | Ent PP | Ent Solver | –
CURR,EMF Pro | Premium | Enterprise | Ent PP | Ent Solver | –
CONCPro | Premium | Enterprise | Ent PP | Ent Solver | –
DELETE Pro | Premium | Enterprise | Ent PP | Ent Solver | DYNA

Menu Paths

Main Menu>Preprocessor>Element Type>Add DOF
Main Menu>Preprocessor>Element Type>Remove DOFs

Release 18.2 - © ANSYS, Inc. All rights reserved.